Arduino Mega 2560 Library for Proteus V2.0

Hi Guys! Happy to see you around. In this post today, I’ll detail the new version of Arduino Mega 2560 Library for Proteus V2.0. I have already detailed the Arduino Mega 2560 Library for Proteus that is the previous version of the Arduino Mega 2560 board. This new version of Arduino Mega 2560 is more efficient, robust, fast, powerful, and small in size.

I keep getting messages requesting to design the library for the new version of Arduino Boards. So, today I’m willing to comply with your requests and have designed this library for the new version of Arduino Mega 2560. I have previously discussed the Arduino UNO Library for Proteus V2.0 and Arduino Mini Library for Proteus V2.0

In this tutorial, we will simulate Arduino Mega 2560 in Proteus. Initially, we will download this library in zip format and then will use it in our Proteus software to simulate Arduino Mega 2560. Before we read further, let’s go through what is Arduino Mega 2560?

What is Arduino Mega 2560?

• The Arduino Mega 2560 is a robust, powerful, application-type microcontroller board based on the Atmega2560 microcontroller.
• There are total 54 digital I/O pins incorporated on the board, including 15 pins for PWM.

• There are 16 analog pins available on the board. Moreover, the board contains a USB port to transfer the code from the computer to the module, and a DC power jack is included on the board to power up the module.

This was the little intro to Arduino Mega 2560. Let’s discuss how to download the Arduino Mega 2560 library and use it in your Proteus software.

Let’s get started.

Arduino Mega 2560 Library for Proteus V2.0

First of all, download the Arduino Mega 2560 library for Proteus V2.0 by clicking the link below.

[DownloadButton]

You will get the downloaded file in zip format.

• Extract this zip file where you’ll find the folder named “Proteus Library Files”.

When you open this folder, you will find two files named:

• ArduinoMega25602TEP.dll
• ArduinoMega25602TEP.idx

Note:

• If you are facing problems in adding a library in Proteus 7 or 8 Professional, then you should read How to add new Library in Proteus 8 Professional.
• If you haven’t bought your Arduino Mega 2560 yet, then you can buy it from this reliable source:

[DownloadButton link=”https://ift.tt/30WpSCN; title=”Buy Arduino UNO”]

• If you want to go through its technical specifications, features and pinout then you better have a look at Introduction to Arduino Mega 2560.

Now copy these files and place them in the libraries folder of your Proteus software.

• After placing the library files, open your Proteus software or restart (if it’s already open).
• Now search for the Arduino Mega 2560 V2.0 by clicking the “Pick from Libraries” button as shown in the below figure.

• Select Arduino Mega 2560 V2.0 and click OK.

• Place Arduino Mega 2560 board in the Proteus workspace and it will appear as shown in the below figure.

• You’ve successfully placed the Arduino Mega 2560 V2.0 board in the proteus workspace.
• Now, we need to upload the hex file to simulate our board.

• To upload the hex file, double-click the Arduino Mega 2560 board.
• As you double click, it will return the following image.

In this panel, you can see the different properties of the Mega 2560 board. We have to click the property named “Program File” to upload the hex file of your Arduino code.

• Click this read detailing how to get hex file from Arduino software, if you don’t know already.
• Upload the hex file of your code and click Ok.
• The clock frequency of the Arduino board is 16MHz by default as shown in the properties panel.

Now let’s design a simulation using this Arduino Mega 2560 board so that you get a clear insight on how to use it in proteus.

Arduino Mega 2560 LCD Interfacing

• The Arduino Code and its simulation file have been added in the zip format that you have downloaded at the start.
• Use that simulation but the best way is to design your own simulation that will assist you to learn better along the process.
• Next, Arduino Mega 2560 Board is interfaced with a 20×4 LCD.
• Design the circuit given below to interface LCD with the Arduino Mega 2560 board:

• Data pins of LCD are connected with 8,9,10 & 11 pins of Arduino Mega 2560, while Pins 12 & 13 of Arduino board are connected to Enable & Reset of LCD.
• To upload the code, compile the Arduino code available in the zip format and get the Hex file.

• You will use Arduino Mega 2560 properties panel to upload the hex file as we excercised in the previous section.
• You have successfully interfaced LCD with the Arduino Mega 2560 board, now press the RUN button to get the result shown in the below figure:

Summary

• First, you need to download the Arduino Mega 2560 Library Files.
• Next, copy these files from “Proteus Library Files”(Folder) to the Library folder of Proteus software.
• Now, look for the Arduino Mega 2560 in Proteus software.
• Place that Arduino Mega 2560 board in the proteus workspace.
• Next, double click the board that will return the properties panel and upload the HEX File.
• Design your circuit & run the simulation.

That’s all for today. Hope you’ve enjoyed reading this article. If you’re unsure or have any questions, you can pop your comment in the section below. I’m willing to help you the best way I can. Feel free to share your valuable feedback and suggestions around the content we share. They help us create quality content tailored to your exact needs and requirements. Thank you for reading the article.

JLCPCB – Prototype 10 PCBs for $2 (For Any Color)
China’s Largest PCB Prototype Enterprise, 600,000+ Customers & 10,000+ Online Orders Daily
How to Get PCB Cash Coupon from JLCPCB: https://bit.ly/2GMCH9w

The post Arduino Mega 2560 Library for Proteus V2.0 appeared first on The Engineering Projects.